Intern CV


Personal Details
Desired job title:   Intern
Location:  
Added On:   about 3 months ago

Internal

More...

Industries

Engineering Design, Creative & Arts medicine

Job Titles

Mechanical Engineering Animator Intern

Skills

Airbus A320 Aircraft Boeing 707 Aircraft Boeing 717 Aircraft Boeing 720 Aircraft Boeing 727 Aircraft Boeing 737 Aircraft Boeing 737-100 Boeing 737-200 Boeing 737-300 Boeing 737-400 Boeing 737-500 Boeing 737 New Generation Boeing 747 Aircraft Boeing 747-100 Boeing 747-200 Boeing 747-300 Boeing 747-400 Boeing 747-8 Boeing 757 Aircraft Boeing 767 Aircraft Boeing 777 Aircraft Boeing 787 Aircraft McDonnell Douglas/Boeing C-124 Aircraft McDonnell Douglas/Boeing C-17 Aircraft McDonnell Douglas/Boeing C-74 Aircraft new design Certification in Airplane Performance Certification in Robotics CATIA HyperMesh Matlab Nx Siemens Hardware Data Collection Teamwork Verbal skills ANSYS Time Management Communication Skills

Qualifications

Masters Degree Design and Simulation Software Engineering Mechanical Engineering

Employment History

Intern

2020 - Present

Taneja Aerospace and Aviation Pvt Ltd-------- * Familiarized with aircraft terminology and basic service procedures * Attended technical lectures by the general service team on light aircrafts like Cessna citation X, Embraer Phenom 100 and narrow body aircrafts like Airbus A320 and Boeing 737 * Assisted in the storage and warehousing of various aircrafts in the Hosur Aerodrome during the pandemic * Skills Developed: Commercial Awareness, Negotiation,Judgement and Decision Making


Intern

2019 - 2019

Vik -Sandvik ------- * Investigated the design of a ship's air intake whose design caused breathing troubles in the engine * Coordinated with the design team to improve airflow inside the intake without making significant changes to the overall structure * Proposed a new design which had a better flow profile and provided sufficient volume of air for the engine using ANSYS * Compared my design solution with that of the design team and recommended modifications * Skills Developed: Working under pressure, Resilience, Critical and Analytical thinking


Intern

2018 - 2018

* Involved in the measuring of dimensions of a fuel tank of a bike using coordinate measurement machine * Utilised CATIA to reverse engineer the design for the fuel tank * Presented the design to a panel of eminent 3rd party manufactures from various reputed firms * Skills Developed: Creativity, Attention to details


Intern

2018 - 2018

* Visited various parts of the production plant to understand the workflow * Researched and gathered data on methods that improve efficiency of production * Presented the findings to the R&D Department in the form of a report * Spent a week networking with the employees from various departments to learn the key issues that the industry faces * Skills Developed: Complex Problem Solving ,Verbal skills


Intern

2017 - 2017

* Involved in detailed discussions with the Production team about the requirements and demands of the client * Coordinated with the Engineering team to decide the location and placements of storage tanks and transportation pipes * Simulated the internal pipe flow in ANSYS to ensure there is no flow disruption * Presented the results of the simulation to the Head of the Engineering Department * Skills Developed: Teamwork, Time Management,Communication Skills


Education History

Name of Institution: IIT

Institute Location: , , , IN

Education Title: Certification in Robotics


2019 - 2019

Institute Location: , , , IN

Education Title: Certification in Airplane Performance

Major: Product Design, Manufacturing

Description: Certification in Airplane Performance, Product Design and Development, Product Design and Manufacturing from elite IITs in


- 2019

Description: Production of Magnesium Foam by space-holder method and using micro arc oxidation to coat the foam for use in bio-material scaffolding * Synthesized Magnesium foam for Mg powder and Urea using Space-method * Conducted various tests in the laboratory to assess the strength and physical properties of the foam material * Coated the foam using the process of Micro-arc oxidation using advanced equipment * Estimated the advantages of Coated Mg foam over traditional scaffold materials


- 2020

Description: Stress and material analysis of an automotive steering knuckle using SOLIDWORKS and ANSYS(Final year Dissertation) * Designed a steering knuckle for a light-weight road car using SolidWorks * Calculated the various forces which would act on the knuckle using Free body diagram * Simulated Stress-strain for various materials like Cast iron , Aluminium and Magnesium using ANSYS Static Structural * Interpreted the simulation results and produced a report on qualitative and quantitative analysis of the materials * Presented the results to a panel of academics * Achieved an individual score of 89%


2016 - 2020

Name of Institution: Vellore Institute of Technology

Institute Location: , Chennai, Tamil Nadu, IN

Education Title: Bachelor of Technology

Major: Mechanical Engineering

Description: * Relevant modules:Machine drawing, Fluid Mechanics, Design of machine elements , Tool Design , Rapid Manufacturing Technologies, Mechanical vibrations , Mechanics of Machines , Engineering Mechanics and Engineering Thermodynamics


2020 - 2021

Name of Institution: University of Leeds

Education Title: Master of Science

Major: Advanced Mechanical Engineering

Description: * Expected to graduate with a 2:1 * Relevant modules:Computational Fluid Dynamics Analysis, Engineering Computational methods, Team Design Project ,Design Optimization


Hobbies & Interest

Interests * Demonstrated commitment to attend 2 training sessions per week to learn to play the Keyboard , Guitar,Violin and Drum pad and performed at various concerts * Served as the church choir master for 4 years * Coordinated and conducted various music events * Competed in university level E-sports competitions https://www.linkedin.com/in/allan-jones-daniel-ron/


Personality Assessment data not available!


Intern CV Profile

Allan Jones Daniel Ronald

82,Ripon Street,Preston PR17UJ|+#####| Email:#####|

 

Education

September 2020 to September 2021 – MSc Advanced Mechanical Engineering, University of Leeds

                Expected to graduate with a 2:1

                Relevant modules:Computational Fluid Dynamics Analysis, Engineering Computational methods, Team Design Project ,Design Optimization

July 2016 to June 2020 – B.Tech Mechanical Engineering, Vellore Institute of Technology, Chennai

                Achieved a CGPA of 7.96/10

                Relevant modules:Machine drawing, Fluid Mechanics, Design of machine elements , Tool Design , Rapid Manufacturing Technologies, Mechanical vibrations , Mechanics of Machines , Engineering Mechanics and Engineering Thermodynamics

Work Experience

April 2020 to July 2020 -Taneja Aerospace and Aviation Pvt Ltd-Intern

                Familiarized with aircraft terminology and basic service procedures

                Attended technical lectures by the general service team on light aircrafts like Cessna citation X, Embraer Phenom 100 and narrow body aircrafts like Airbus A320 and Boeing 737

                Assisted in the storage and warehousing of various aircrafts in the Hosur Aerodrome during the pandemic

                Skills Developed: Commercial Awareness, Negotiation,Judgement and Decision Making

May 2019 to July 2019 -Vik -Sandvik Design India Pvt Ltd-Intern

                Investigated the design of a ship’s air intake whose design caused breathing troubles in the engine

                Coordinated with the design team to improve airflow inside the intake without making significant changes to the overall structure

                Proposed a new design which had a better flow profile and provided sufficient volume of air for the engine using ANSYS

                Compared my design solution with that of the design team and recommended modifications

                Skills Developed: Working under pressure, Resilience, Critical and Analytical thinking

 

June 2018 to July 2018-Amtech Engineering Pvt Ltd-Intern

                Involved in the measuring of dimensions of a fuel tank of a bike using coordinate measurement machine

                Utilised CATIA to reverse engineer the design for the fuel tank

                Presented the design to a panel of eminent 3rd party manufactures from various reputed firms

                Skills Developed: Creativity, Attention to details

May 2018 to June 2018 -Hyundai Motors Corporation Ltd-Intern

                Visited various parts of the production plant to understand the workflow

                Researched and gathered data on methods that improve efficiency of production

                Presented the findings to the R&D Department in the form of a report

                Spent a week networking with the employees from various departments to learn the key issues that the industry faces

                Skills Developed: Complex Problem Solving ,Verbal skills

 

May 2017 to June 2017- Gulf Engineers Pvt Ltd India-Intern

                Involved in detailed discussions with the Production team about the requirements and demands of the client

                Coordinated with the Engineering team to decide the location and placements of storage tanks and transportation pipes

                Simulated the internal pipe flow in ANSYS to ensure there is no flow disruption

                Presented the results of the simulation to the Head of the Engineering Department

                Skills Developed: Teamwork, Time Management,Communication Skills

 

 

Academic Projects  

March 2020 – Stress and material analysis of an automotive steering knuckle using SOLIDWORKS and ANSYS(Final year Dissertation)

                Designed a steering knuckle for a light-weight road car using SolidWorks

                Calculated the various forces which would act on the knuckle using Free body diagram

                Simulated Stress-strain for various materials like Cast iron , Aluminium and Magnesium using ANSYS Static Structural

                Interpreted the simulation results and produced a report on qualitative and quantitative analysis of the materials

                Presented the results to a panel of academics

                Achieved an individual score of 89%

November 2019 - Production of Magnesium Foam by space-holder method and using micro arc oxidation to coat the foam for use in bio-material scaffolding

                Synthesized Magnesium foam for Mg powder and Urea using Space-method

                Conducted various tests in the laboratory to assess the strength and physical properties of the foam material

                Coated the foam using the process of Micro-arc oxidation using advanced equipment

                Estimated the advantages of Coated Mg foam over traditional scaffold materials

September 2018 -Design of a prototype two-wheeler helmet with inbuilt Breathalyzer, RFID tag and GPS

                Designed a helmet using CATIA and the model design was 3-D printed

                Helmet contained a Breathalyzer and a pressure pad to make sure that the rider was sober and wore the helmet

                Implemented various commands using Arduino Uno to ensure the riders safety

                Presented the working of the prototype to a panel of academics

October 2017 - Low Temperature Hydrothermal Synthesis and Characterisation of Nano Size Ni-Zn Ferrites (published in the International Journal in Applied Science and Technology, Volume 5, Issue X) (Group of 5)

                Synthesized Ni-Zn ferrites using an air oven by carefully combining various compounds with appropriate mole ratios

                Performed XRD and FTIR tests on the sample to check for potential impurities and moisture content

                Investigated the thermal properties of the sample by providing hydrothermal treatment under an electron microscope

                Negotiated the division of workload and responsibilities according to the strengths of the group members

                Planned and set the project timeframes and mediated communication between sub-teams

Ongoing - Design of Lamp post using SolidWorks and strength analysis using ANSYS.

 

Co-curricular achievements

                September 2017 to March 2020-Master Diploma in Design and Simulation Software (CATIA, ANSYS, NX,HyperMesh), Provided by CADD Centre,India

                February 2019 to April 2019-Certification in Airplane Performance, Product Design and Development, Product Design and Manufacturing from elite IITs in India

                September 2018 Certification in Robotics from an elite IIT in India

                June 2018 to April 2018-Organised various technical events and workshops as the Undergraduate Representative for the Aerodynamics club at the University

                June 2019 to April 2019-Ensured smooth functioning of the 3-D printing lab as the Student In-charge at the University

 

Skills

                Proficient in programming languages C, C++ and Python.

                Competent in MATLAB, SolidWorks, CATIA, ANSYS, Siemens NX, HyperMesh.

                Competent in handling various machinery including welding equipment, furnace and foundries, lathe machines and 3-D printers.

Interests

                Demonstrated commitment to attend 2 training sessions per week to learn to play the Keyboard , Guitar,Violin and Drum pad and performed at various concerts

                Served as the church choir master for 4 years

                Coordinated and conducted various music events

                Competed in university level E-sports competitions

https://www.linkedin.com/in/allan-jones-daniel-ronald/

References available upon request

Enter text here...

Download CV